AD16-22D Series 22mm Indicator Lamp 220V AC Red/Green/Yellow/White/Blue Color With Buzzer
Technical Specification:
- Working life hours:≥3000 Hours
- Dielectric strength: 2.5KV(ACRMS),1 min
- Usage Frequency(AC): 50-60Hz
- Rated operating current:≤20mA
- Comparative tracking index CT≥100, flame retardant
Attentions:
- The frequency of AC type pilot lamp is 50-60Hz. If work in other frequency ranges, it will be broken.
- connection error is not allowable to Ac type dual-color light,otherwise pilot lamp will be broken.
- Avoid using mode to connect lines as possible and you should using general plug(2.5.0.8mm)to connect and wear the protective sleeve. If you need to weld, please finish it in 3 seconds by the electric iron which is below 30W and don not exert external force on terminals.
Model Specification:
Color: Red/Green/Yellow/White/Blue
Installation Dimensions of neck: Ф16mm, Ф22mm
Type:
M --- Buzzer
S --- Flicker
SM --- Flicker and Buzzer
SS --- Dual-color Lamp
D --- Signal Lamp
DB --- Signal lamp Voltmeter
E --- Ф16mm Signal Lamp
Operating Voltage:
AC/DC:6V/12V/24V/36V/48V/110V/220V/380V
AC:220V/380V
Normal working conditions:
- Environmental temperature:-25℃~+55℃
- Relative humidity:<=98%
- It can normally work under following condition: vibration frequency is 2~80Hz and accelerated speed is 0.7g.
- Pollution grade is 3 and installed sort is Ⅲ.
- There is a "TH" sign, and it is possible to work under the moist tropical environment.
Further information:
- Plastics materials: all raw materials are brand-new and second-hand materials are forbidden. Furthermore some of them are supplied by super branding companies like DSM, Mitsubishi.
- There is just one level of quality as A in MEIHENG and we are aim to provide the excellent articles to our clients and help them gain more market shares.
A. How's the delivery time?
Depend on your quantity, usually within 20days after receiving deposit
B. Would you accept OEM/ODM service?
Glad to say that there is planning department, technical department and mould tooling center in
our factory. For the OEM & ODM, it is ok for us if your brand, market shares are great.
